Safe steps to try
- 1
Confirm the cartridge number matches the one listed in your printer manual. Similar numbers can be for other regions or models.
- 2
Remove the cartridge and check that all protective tape and clips are removed, without touching the copper contacts.
- 3
Reseat the cartridge firmly until it clicks into place, then close the cover and let the printer complete its check.
- 4
Turn the printer off and on once to make it re-read the cartridges.
- 5
If a third-party cartridge is rejected after a firmware update, check the manufacturer’s notes for your model before changing settings.
When to stop
Do not clean contacts with liquids or scrape them. If a genuine cartridge is still rejected, contact the manufacturer or retailer.
If you would like help, any remote session is arranged in advance and only starts with your explicit consent. You can decline and still receive guidance by phone or in writing.
We help with setup, connectivity and software. Hardware repairs, replacement parts and home visits are not part of our service.